Redirection of the rtsp stream from an rtsp server to the Onvif server

[AgentPanic0]

I'm having difficulty redirecting an RTSP video stream to the onvif server created by rpos, I believe I have to use the proxy configuration model.

I would like to confirm that the configuration file is correct and what the error "The pixelformat index was invalid" is about

Error when I run rpos:

node rpos.js
cat: /proc/device-tree/model: No such file or directory
Failed to read serial : Cannot read properties of null (reading '1')
Using IP address from config: 192.168.1.113
Manufacturer : RPOS Proxy
Model : PROXY
HardwareId :
SerialNumber : 000000000
FirmwareVersion : 2.1.0
Starting camera settings webserver on http://192.168.1.113:8081/
The pixelformat index was invalid
Could not retrieve Controlvalue 'brightness'
Could not retrieve Controlvalue 'contrast'
Could not retrieve Controlvalue 'saturation'
Could not retrieve Controlvalue 'red_balance'
Could not retrieve Controlvalue 'blue_balance'
Could not retrieve Controlvalue 'horizontal_flip'
Could not retrieve Controlvalue 'vertical_flip'
Could not retrieve Controlvalue 'power_line_frequency'
Could not retrieve Controlvalue 'sharpness'
Could not retrieve Controlvalue 'color_effects'
Could not retrieve Controlvalue 'rotate'
Could not retrieve Controlvalue 'color_effects_cbcr'
Could not retrieve Controlvalue 'video_bitrate_mode'
Could not retrieve Controlvalue 'video_bitrate'
Could not retrieve Controlvalue 'repeat_sequence_header'
Could not retrieve Controlvalue 'h264_i_frame_period'
Could not retrieve Controlvalue 'h264_level'
Could not retrieve Controlvalue 'h264_profile'
Could not retrieve Controlvalue 'auto_exposure'
Could not retrieve Controlvalue 'exposure_time_absolute'
Could not retrieve Controlvalue 'exposure_dynamic_framerate'
Could not retrieve Controlvalue 'auto_exposure_bias'
Could not retrieve Controlvalue 'white_balance_auto_preset'
Could not retrieve Controlvalue 'image_stabilization'
Could not retrieve Controlvalue 'iso_sensitivity'
Could not retrieve Controlvalue 'exposure_metering_mode'
Could not retrieve Controlvalue 'scene_mode'
Could not retrieve Controlvalue 'compression_quality'
Binding DeviceService to http://192.168.1.113:8081/onvif/device_service
Binding MediaService to http://192.168.1.113:8081/onvif/media_service
Binding PTZService to http://192.168.1.113:8081/onvif/ptz_service
Binding ImagingService to http://192.168.1.113:8081/onvif/imaging_service
discovery_service started
(node:21379) [DEP0040] DeprecationWarning: The punycode module is deprecated. Please use a userland alternative instead.
(Use node --trace-deprecation ... to show where the warning was created)
device_service started
ptz_service started
Starting rtsp server
media_service started
imaging_service started

Settings file:

{
"NetworkAdapters" : ["awdl0","eth0", "wlan0", "en0"],
"IpAddress" : "192.168.1.113",
"ServicePort" : 8081,
"Username" : "",
"Password" : "",
"CameraType" : "picam",
"RTSPAddress" : "rtsp://192.168.1.113", "//":"Normally left blank. Used to set RTSP Server Address",
"RTSPPort" : 8554,
"RTSPName" : "stream",
"MulticastEnabled" : false,
"RTSPMulticastName" : "h264m",
"MulticastAddress" : "224.0.0.1",
"MulticastPort" : "10001",
"RTSPServer" : 0, "RtspServerComment" : "## Select RTSP Server > 0:Use RTSP Server from 'RTSPAddress:' 1:RPOS RTSP Server 2:V4L2 RTSP Server by mpromonet (auto selected if MulticastEnabled=true) 3:GStreamer RTSP Server",
"PTZDriver" : "none", "PTZDriverComment": "## valid values are none,tenx,pelcod,visca and pan-tilt-hat",
"PTZOutput" : "none", "PTZOutputComment": "## values are none (eg Tenx), serial and tcp",
"PTZSerialPort" : "/dev/ttyUSB0",
"PTZSerialPortSettings" : { "baudRate":2400, "dataBits":8, "parity":"none", "stopBits":1 },
"PTZOutputURL": "127.0.0.1:9999",
"PTZCameraAddress": 1,
"DeviceInformation" : {
"Manufacturer" : "RPOS Proxy",
"Model" : "PROXY",
"HardwareId" : ""
},
"logLevel" : 3, "logLevelComment": "## LogLevels are > 1:Error 2:Warning 3:Info 4:Debug",
"logSoapCalls" : false
}