docu refactoring

mathertel · mathertel · commit 9a1077a9d2a3 · 2025-02-26T20:55:42.000+01:00
diff --git a/boards/adapter2.md b/boards/adapter2.md
@@ -1,7 +1,6 @@
 ---
 title: ESP-12 Adapter
 tags: ["Board"]
-layout: "page.njk"
 description: Adapter for ESP-12 modules.
 excerpt: >
   This adapter for the ESP-12 type boards is including space for soldering components.
diff --git a/boards/devices/2-channel-relay.md b/boards/devices/2-channel-relay.md
@@ -1,7 +1,6 @@
 ---
 title: 2 channel relay
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   This board can switch 2 relay outputs using a ESP-01 board.
 ---
diff --git a/boards/devices/bulb.md b/boards/devices/bulb.md
@@ -3,7 +3,6 @@ title: Bulb Devices
 tags:
   - "Board"
   - "Light"
-layout: "page.njk"
 description: Light emitting devices like bulbs with ESP chip are supported by the HomeDing library.
 excerpt: >
   Bulb devices using the ESP8266 chip are supported by the minimal sketch
diff --git a/boards/esp32/_template.md b/boards/esp32/_template.md
@@ -3,7 +3,6 @@ title:
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: ESP32 based board with ...
 excerpt: >
   This board uses a ESP32 processor ...
diff --git a/boards/esp32/azureiotkit.md b/boards/esp32/azureiotkit.md
@@ -1,7 +1,6 @@
 ---
 title: ESP32 Azure IoT Kit
 tags: ["Board"]
-layout: "page.njk"
 description: ESP32 based IoT Kit designed by Microsoft for Azure
 excerpt: >
   This is a ESP32 based board based on ESP-WROVER-B module designed by espressif and Microsoft as a reference IoT Kit
diff --git a/boards/esp32/devkit.md b/boards/esp32/devkit.md
@@ -1,7 +1,6 @@
 ---
 title: ESP32 DevKit Boards
 tags: ["Board"]
-layout: "page.njk"
 description: ESP32 General purpose development boards
 excerpt: >
   The ESP32 DevKit Boards come in various formats and sizes with WROOM modules and USB adapter.
diff --git a/boards/esp32/esp32audiokit.md b/boards/esp32/esp32audiokit.md
@@ -3,7 +3,6 @@ title: Ai-Thinker ESP32 Audio Kit
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: ESP32 Board with Audio features
 excerpt: >
   This is an ESP32 based board using the ESP-WROVER-B module supporting audio processing.
diff --git a/boards/esp32/index.md b/boards/esp32/index.md
@@ -1,7 +1,6 @@
 ---
 title: ESP32 Boards
 tags: ["Board" , "WIP"]
-layout: "page.njk"
 description: ESP32 based boards
 excerpt: >
   There are several boards available using the ESP32 chip.
diff --git a/boards/esp32/panel-3248S035.md b/boards/esp32/panel-3248S035.md
@@ -3,7 +3,6 @@ title: Panel ESP32-3248S035
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: ESP32 board with 480*320px, 16 bit LCD color touch display
 excerpt: >
   This panel is using a ESP32 processor with 4M Flash Memory in combination
diff --git a/boards/esp32/readme.md b/boards/esp32/readme.md
@@ -3,7 +3,6 @@ title: About using the ESP32 with HomeDing
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: Links, material and tips for using ESP32 based boards with the HomeDing library.
 excerpt: >
   Links, material and tips for using ESP32 based boards with the HomeDing library.
diff --git a/boards/esp32/ttgo-koala.md b/boards/esp32/ttgo-koala.md
@@ -3,7 +3,6 @@ title: TTGO Koala Board
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: >
   ESP32 Development board that fits on breadboards based on the ESP32 WROVER - B mdoule
   with integrated LiPo 3.7V battery management.
diff --git a/boards/esp32/ttgo-koala.webp b/boards/esp32/ttgo-koala.webp
diff --git a/boards/esp32/ttgo-t-display.md b/boards/esp32/ttgo-t-display.md
@@ -3,7 +3,6 @@ title: LilyGO TTGO T-Display
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: ESP32 board with integrated TFT color display.
 excerpt: >
   The LilyGO TTGO T-Display board offer an integrated TFT color display and a USB-C type connector.
diff --git a/boards/esp32/ttgogallery.md b/boards/esp32/ttgogallery.md
@@ -3,7 +3,6 @@ title: TTGO Gallery (T14)
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: ESP32 Wrover-B board with integrated TFT color display and audio.
 excerpt: >
   The LilyGO TTGO Gallery (T14) board offers an integrated TFT color display, SD Card, 4 buttons and Audio DAC output with amplifier.
diff --git a/boards/esp32c3/_template.md b/boards/esp32c3/_template.md
@@ -1,7 +1,7 @@
 ---
 title:
 description: ESP32-C3 based board with ...
-image: "/boards/esp32C3/"
+image: "/boards/esp32c3/"
 tags:
   - "Board"
   - "WIP"
diff --git a/boards/esp32c3/core.md b/boards/esp32c3/core.md
@@ -1,7 +1,7 @@
 ---
 title: CORE-ESP32C3 development board
 description: ESP32C3 board with LCD and digital joystick.
-image: "/boards/esp32C3/core.jpg"
+image: "/boards/esp32c3/core.jpg"
 tags: ["Board"]
 excerpt: >
   The CORE-ESP32 core board is based on Espressif ESP32-C3 SoC
diff --git a/boards/esp32c3/esp32c3-01.md b/boards/esp32c3/esp32c3-01.md
@@ -1,7 +1,7 @@
 ---
 title: Board ESP32-C3 ESP-01
 tags: ["Board"]
-image: "/boards/esp32C3/esp32c3-01.jpg"
+image: "/boards/esp32c3/esp32c3-01.jpg"
 description: ESP32-C3 board in the ESP-01 form factor.
 excerpt: >
   The ESP32-C3 processor is now also available in a ESP01 form factor board
diff --git a/boards/esp32c3/micro.md b/boards/esp32c3/micro.md
@@ -1,7 +1,7 @@
 ---
 title: ESP32-C3 micro board with OLED display
 description: Very small ESP32-C3 Board with OLED display.
-image: "/boards/esp32C3/micro.jpg"
+image: "/boards/esp32c3/micro.jpg"
 tags: ["Board"]
 excerpt: >
   This is very small board based on EPS32-C3 with an 0.42" onboard OLED display
diff --git a/boards/esp32c3/pico.md b/boards/esp32c3/pico.md
@@ -1,7 +1,7 @@
 ---
 title: Board C3 pico 
 description: Very small ESP32-C3 Board with OLED display.
-image: "/boards/esp32C3/pico.jpg"
+image: "/boards/esp32c3/pico.jpg"
 tags:
   - "Board"
   - "WIP"
diff --git a/boards/esp32c3/spotpear-144lcd.md b/boards/esp32c3/spotpear-144lcd.md
@@ -1,7 +1,7 @@
 ---
 title: Spotpear ESP32C3 1.44 LCD
 description: "Small stacked boards based on ESP32C3 with Display"
-image: "/boards/esp32C3/spotpear-144lcd.jpg"
+image: "/boards/esp32c3/spotpear-144lcd.jpg"
 tags: ["Board"]
 excerpt: >
   The Spotpear ESP32C3 1.44 LCD board combines a ESP32-C3 with a display and LIPO charging with a compact design.
diff --git a/boards/esp32c3/super-mini-c3.md b/boards/esp32c3/super-mini-c3.md
@@ -1,7 +1,7 @@
 ---
 title: ESP32-C3 Super Mini
 description: ESP32-C3 thumb-size board with integrated antenna.
-image: "/boards/esp32C3/super-mini-c3.jpg"
+image: "/boards/esp32c3/super-mini-c3.jpg"
 tags:
   - "Board"
   - "WIP"
diff --git a/boards/esp32c3/weact-core-c3.md b/boards/esp32c3/weact-core-c3.md
@@ -1,7 +1,7 @@
 ---
 title: WeAct Studio ESP32-C3 Core
 description: Bare ESP32-C3 based board.
-image: "/boards/esp32C3/weact-core-c3.jpg"
+image: "/boards/esp32c3/weact-core-c3.jpg"
 tags:
   - "Board"
   - "WIP"
diff --git a/boards/esp32c3/xiao_esp32c3.md b/boards/esp32c3/xiao_esp32c3.md
@@ -1,7 +1,7 @@
 ---
 title: XIAO ESP32 C3
 tags: ["Board"]
-image: "/boards/esp32C3/xiao_esp32c3.jpg"
+image: "/boards/esp32c3/xiao_esp32c3.jpg"
 description: ESP32-C3 thumb-size board with external antenna.
 excerpt: >
   The XIAO ESP32 C3 is a thumb-size board with external antenna.
diff --git a/boards/esp32c6/xiao-esp32C6.md b/boards/esp32c6/xiao-esp32C6.md
@@ -3,7 +3,6 @@ title: Seeed Studio XIAO ESP32C6
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: Small ESP32C6 Board
 excerpt: ...
 ---
diff --git a/boards/esp8266/esp01-dht.md b/boards/esp8266/esp01-dht.md
@@ -1,7 +1,6 @@
 ---
 title: ESP-01board with DHT22
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   This little board is a very specific adapter that has a DHT22 sensor and power regulator for a ESP-01 module.
 ---
diff --git a/boards/esp8266/esp01.md b/boards/esp8266/esp01.md
@@ -1,7 +1,6 @@
 ---
 title: Board ESP8266 ESP-01
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   The ESP-01 is the cheapest bare minimum ESP8266 board available. The connector only supports few GPIO pins but it is small and enough for simple sensors and relay appliances. Only 2-4 GPIO signals can be used.
   There are variants of this board with different antenna and different flash sizes.
diff --git a/boards/esp8266/esp12dev.md b/boards/esp8266/esp12dev.md
@@ -1,7 +1,6 @@
 ---
 title: Esp-12 development board
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   This is an adapter board that can be used to flash ESP-12 modules before adding them to a device.
   This solution is especially helpful for creating devices that run on battery or low power conditions and therefore do not need USB chips.
diff --git a/boards/esp8266/esp12e.md b/boards/esp8266/esp12e.md
@@ -1,7 +1,6 @@
 ---
 title: ESP-12e Module
 tags: ["Board"]
-layout: "page.njk"
 description: ESP-12e modules.
 excerpt: >
   The **ESP-12** (old) and **ESP-12E** modules offer 8+8 pins at the sides
diff --git a/boards/esp8266/esp12f.md b/boards/esp8266/esp12f.md
@@ -1,7 +1,6 @@
 ---
 title: ESP-12f Module
 tags: ["Board"]
-layout: "page.njk"
 description: ESP-12f Module.
 excerpt: >
   On the **ESP-12F**, in addition to the ESP-12E some more pins are available on the "bottom" side that are th signals
diff --git a/boards/esp8266/esp12s.md b/boards/esp8266/esp12s.md
@@ -1,7 +1,6 @@
 ---
 title: ESP-12s Module
 tags: ["Board"]
-layout: "page.njk"
 description: ESP-12 modules.
 excerpt: >
   The **ESP-12S** is an optimized version from esp-12f with a better antenna signal. FLASH SPI signals are not available.
diff --git a/boards/esp8266/espwroom.md b/boards/esp8266/espwroom.md
@@ -1,7 +1,6 @@
 ---
 title: ESP-WROOM Module
 tags: ["Board"]
-layout: "page.njk"
 description: ESP-WROOM Module.
 excerpt: >
   The **ESP-WROOM-02** is not strictly the same form factor this module is directly made by espressif
diff --git a/boards/esp8266/neo.md b/boards/esp8266/neo.md
@@ -4,7 +4,6 @@ icon: neo
 tags:
   - "Element"
   - "Light"
-layout: "page.njk"
 excerpt: >
   The neo board is a very specific adapter to drive a Neopixel based
   stripe, wheel or array using a ESP-01 board.
diff --git a/boards/esp8266/wemos18650.md b/boards/esp8266/wemos18650.md
@@ -1,7 +1,6 @@
 ---
 title: WeMos ESP8266 board with OLED and 18650
 tags: ["Board"]
-layout: "page.njk"
 description: ESP8266 with OLED display, joystick input and 18650 battery holder.
 excerpt: >
   This board from WeMos has a OLED display on a ESP-12E module based ESP8266 board
diff --git a/boards/index.md b/boards/index.md
@@ -3,7 +3,6 @@ title: Boards and Processor modules
 tags:
   - "Board"
   - "Implementation"
-layout: "page.njk"
 description: Boards supported by the HomeDing library
 excerpt: >
   The HomeDing library can be used with Boards and Processor modules
diff --git a/boards/mini/d1mini.md b/boards/mini/d1mini.md
@@ -3,7 +3,6 @@ title: D1 Mini Boards (ESP8266 and ESP32)
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 description: ESP8266 General purpose development boards with same form factor.
 excerpt: >
   There are many different mini boards available with differend ESP processors
diff --git a/boards/mini/d1miniesp32.md b/boards/mini/d1miniesp32.md
@@ -3,7 +3,6 @@ title: Board D1 Mini ESP32
 tags:
   - "Board"
   - "WIP"
-layout: "page.njk"
 ---
 
 {% from 'macros.njk' import carousel %}
diff --git a/boards/mini/index.md b/boards/mini/index.md
@@ -1,7 +1,6 @@
 ---
 title: Mini modules and Shields
 tags: ["Board"]
-layout: "page.njk"
 description: Several Boards in the 'mini' layout
 excerpt: >
   The HomeDing library can be used with these Boards that offer a selection of processor modules and shield.
diff --git a/boards/mini/shield-sd.md b/boards/mini/shield-sd.md
@@ -1,7 +1,6 @@
 ---
 title: D1 Mini SD Card shield
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   The SD Card shield for the D1 Mini sized boards using 1wire SPI for data transfer.
 ---
diff --git a/boards/nodemcu.md b/boards/nodemcu.md
@@ -1,7 +1,6 @@
 ---
 title: ESP8266 NodeMCU development boards
 tags: ["Board"]
-layout: "page.njk"
 description: ESP8266 General purpose development boards
 excerpt: >
   The NodeMCU boards are one of the most common development boards using ESP8266 modules.
diff --git a/boards/pins.md b/boards/pins.md
@@ -1,7 +1,6 @@
 ---
 title: Using IO pins of the ESP8266 based boards
 tags: ["Board"]
-layout: "page.njk"
 ---
 
 The ESP8266 17 General Purpose Input/Output (GPIO) pins that can be used for a variety of uses.
diff --git a/boards/sockets.md b/boards/sockets.md
@@ -1,7 +1,6 @@
 ---
 title: Retail Plug and Socket Devices
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   There are many devices on the market that use the ESP8266 chip to switch main power by internal relays.
   Some of them also support monitoring the power consumption.
diff --git a/boards/sonoffbasic.md b/boards/sonoffbasic.md
@@ -1,7 +1,6 @@
 ---
 title: Sonoff Basic (R1)
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   The Sonoff Basic is a off-the-shelf smart relay to switch main power consumers.
   It is using the ESP8266 CPU and 1 MByte Flash and can be used with the Minimal Example.
diff --git a/boards/sonoffs20.md b/boards/sonoffs20.md
@@ -1,7 +1,6 @@
 ---
 title: Sonoff S20
 tags: ["Board"]
-layout: "page.njk"
 excerpt: >
   The Sonoff S20 is a smart socket off-the-shelf product to switch main power consumers.
   It is using the ESP8266 CPU and 1 MByte Flash and can be used with the Minimal Example.
diff --git a/boards/wemosoled.md b/boards/wemosoled.md
@@ -1,7 +1,6 @@
 ---
 title: Board Review ESP8266 with OLED
 tags: ["Board"]
-layout: "page.njk"
 description: ESP8266 with OLED display
 excerpt: >
   This WeMos labeled board has a OLED display using the SSD1306 chip
diff --git a/boards/whiteadapter.md b/boards/whiteadapter.md
@@ -1,7 +1,6 @@
 ---
 title: White Adapter board for ESP8266
 tags: ["Board"]
-layout: "page.njk"
 description: ESP8266 board for using ESP-12 on breadboards.
 excerpt: >
    This 'white' adapter board helps soldering ESP-12 of similar boards in regular breadboards and prototype boards.
diff --git a/boards/wifikit8.md b/boards/wifikit8.md
@@ -1,7 +1,6 @@
 ---
 title: Wifi Kit 8 Module ESP8266 with OLED
 tags: ["Board"]
-layout: "page.njk"
 description: ESP8266 General purpose development board with OLED
 excerpt: >
   The Wifi Kit 8 Module ESP8266 with OLED is a ESP8266 with 4k Flash, OLED display and Li-Polymer battery support. It has a slim size and fits well on breadboards.
diff --git a/boards/witty.md b/boards/witty.md
@@ -1,7 +1,6 @@
 ---
 title: Witty-Board
 tags: ["Board"]
-layout: "page.njk"
 description: ESP8266 General purpose development boards with LDR and RGB led.
 excerpt: >
   The Witty board offers a ESP8266-12F solution with a RGB LED, a LDR sensor and an input button. It can be used on a breadboard.
diff --git a/boards/world-clock.md b/boards/world-clock.md
@@ -1,7 +1,6 @@
 ---
 title: Word Clock Example 
 tags: ["Board"]
-layout: "page.njk"
 ---
 
 <https://www.ebay.de/itm/274588288050>
