2.19.2-1

[bb-qq]

• The base code has been updated to version 2.19.2 which includes the following changes:
  • Microcode updates, especially major corrections to RTL8157
  • Energy Efficient Ethernet(EEE) Improvements for RTL8157
  • Improved handling of 5 Gbps links for RTL8157

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su
• Selecting a proper version is needed depending on your DSM version.
  • DSM 7.2 and above
    • use packages with the suffix _7.2.
  • DSM 7.0 and DSM 7.1
    • use packages with the suffix _7.1.
  • DSM 6.2.x
    • use packages with the suffix _6.2.

---

This discussion was created from the release 2.19.2-1.

[Moxie-91]

I know I'm a bit boring and tedious, but can you make drivers for my DS model, which is a 413 with a Freescale P1022 processor - Qoriq?

[bb-qq]

Unfortunately, I cannot create the driver for Qoriq because Realtek does not support for older kernels.

[juofmgoblue]

Can't speak to stability yet (just installed), but getting 3.6-3.8Gbps using a brand new Wavlink 5GbE (NWU340G w/ RTL8157) on DS1520+ (7.2.1) w/o jumbo frames enabled. Was using a TrendNET 2.5GbE for the past year+ reliably, and the extra ~1-1.3Gbps is well worth the $23 it took to upgrade!

[Sjekke]

23$ nice, in EU you pay the double for this adapter if you can find them ...

[juofmgoblue]

On sale right now for $30 on Amazon for Prime Day (maybe USA only? not sure). But I ordered another for my wife yesterday, instead from Newegg.com again, for $27.

[jokinblanco]

hello!! I made the mistake of putting the ssh command before the first failed installation. So it didnt get installed properly, any help to uninstall completely and do it again correctly?? thanks a lot

[bb-qq]

Could you try this procedure?
https://github.com/bb-qq/r8152/wiki/Troubleshooting#uninstall-completely--full-reinstallation

[WolfAGR]

Hi bb-qq, what is the command for removing a folder @appconf in SSH? I try -rm but it doesn't work.

[WolfAGR]

Hi,
I have aquestion redarding DS414 CPU MARVELL Armada XP MV78230 with DSM 7.1.1-42962 Update 8.
I try to install the armada spk for 7.1 but everything I try it wont install.
Can anyone help me please with package should I use?
Thank you.
WolfAGR

[WolfAGR]

Never mind founded the correct one that work for DS414. r8152-armada-2.17.1-2_7.1

[hlcgermany]

Any idea which version of the driver I have to use on my DS920+ with DSM 7.2.2 ?

It doesn't matter which version of the driver i try, it says that the selected package is not supported of my NAS model or compatible with my DSM version. So that's not the message I expected, because it's not really a failed installation?

I got the Club 3D CAC-1420 2.5G adapter.

[hlcgermany]

Hi,
yes I did.

LAN 3 was active then, but only 100 Mbits. Do you have your adapter on the front USB or rear? Mine is currently connected to the Front USB of my DS920+.

I check the cable just to be sure thats not the issue. But I dont think that the cable is faulty.

[WolfAGR]

In the rear. If sync are at 100Mbits check the switch. My USB use RTL8157 5Gbe yours is RTL8156 2.5Gbe. My Switch is manageable and 10Gbe so I can see in the port setting which port sync @ what speed.

[hlcgermany]

Yeah i checked that, i got a UniFi Pro Max 24 at home and of course it is plugged into a 2,5GbE Port. I will plug it into the rear port and test another cable later today.

[hlcgermany]

Hi, the rear USB port works fine.

Thanks for your help mate!

[WolfAGR]

You welcome.

[assmann-ing]

Hi there,
I tried to install the version r8152-apollolake-2.19.2-2_7.2 on my Synology DS918+ with OS Version DSM 7.2.2-72806 Update 3
But the installation failed, telling me that the paket could not get installed
Even when I plug in the UBS Adapter it won't work but with OS Version 6.2 ( and the dedcated driver) it did work last year
Have I done somthing wrong, or is the a compability issue?

Thanks ahead for the feedback
Rudi

[WolfAGR]

What kind of usb to ehternet do you have?

[assmann-ing]

I have a Realtek USB-A 2.5 GbE Family Controller from Logitec called DeLock
When I tested the Controller about 1,5 Years ago with OS 6.2 and your Software it worked right away
I did plug in the Controller in the front USB Port, and I tried to install the software with and without connected Controller
Sorry for my delay but I was 2 days out of town

[WolfAGR]

That is not what I'm asking.
Ok, tel me what Realtek chip set do you have currently. If you are using "Club 3D CAC-1420" is using RTL8156 / RTL8156B and if you are using "wl-nwu340g" https://www.amazon.com/WAVLINK-Ethernet-5000Mbps-Converter-Aluminum/dp/B0DBY23BL9 then the Realtek chip is RTL8157.
Between the quotes is the type of the USB to Ethernet.
I have two Synology, DS414 with RTL8156 because the driver support Armada CPU and DS920+ with RTL5157 connect at the back and they are working.
How to find hardware ID on a Mac that I don't know I use Windows.

[assmann-ing]

Here comes the link where I found the information about upgrading a Synology NAS
https://www.galaxus.de/de/page/synology-nas-upgrade-25-gigabit-mit-usb-lan-adapter-27363

And here comes the information concerning Chip-Set

[WolfAGR]

You can try it connected to the back of yours DS918+ after installation don't forget to reboot the nas.

[WolfAGR]

Or buy Club 3D CAC-1420

[assmann-ing]

Thanks for your fast response

[assmann-ing]

I ordered your recomended USB Stick
But with the exsiting one and reoobt and plug in in the back I got the following Message

[assmann-ing]

So where shall I look for the readme

[Dot-Dash]

Typically on GitHub, find the readme like this:

[assmann-ing]

Thanks for the hint
I did the cli command, boot the system and used synosystem to start the service

But I don't see the NIC in the gui and I still see an installation error

[assmann-ing]

[assmann-ing]

In the interface list I find to eth devices a bond and ovs but no 3rd Ethernet