Trying to debug why the magnetic sensor of my MPU9250/6500 won't connect to my Raspberry Pi 4+ #14
Description
I am trying to debug why the magnetic sensor of my MPU9250/6500 won't connect to my Raspberry Pi 4+, but all the other sensors will. I did a bad soldering job on my first one of these sensors and it just wouldn't connect. I got two new ones though and both of them are detected and give the 0x68 address and work except for the magnetic sensor (if I comment out self.configureAK8963(self.mfs, self.mode), I don't get any errors).
So. my question is, is it possible I just have two bad solders that give the same error message or is it a software problem?
I can't see any problems with the physical unit:
Code
import sys
sys.path.append('/home/tor/robot/MPU-9250-Sensors-Data-Collect/MPU-9250-Sensors-Data-Collect/mpu9250_jmdev')
from registers import *
from mpu_9250 import MPU9250
import time
import logging
##################################################
# Create #
##################################################
mpu = MPU9250(
address_ak=AK8963_ADDRESS,
address_mpu_master=MPU9050_ADDRESS_68, # In 0x68 Address
address_mpu_slave=None,
bus=1,
gfs=GFS_1000,
afs=AFS_8G,
mfs=AK8963_BIT_16,
mode=AK8963_MODE_C8HZ)
##################################################
# Configure #
##################################################
mpu.configure() # Apply the settings to the registers.
##################################################
# Show Values #
##################################################
while True:
print("|.....MPU9250 in 0x68 Address.....|")
print("Accelerometer", mpu.readAccelerometerMaster())
print("Gyroscope", mpu.readGyroscopeMaster())
print("Magnetometer", mpu.readMagnetometerMaster())
print("Temperature", mpu.readTemperatureMaster())
print("\n")
time.sleep(1)
Results
Traceback (most recent call last):
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 97, in configure
self.configureAK8963(self.mfs, self.mode)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 233, in configureAK8963
self.writeAK(AK8963_CNTL1, 0x00, 0.1)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 1013, in writeAK
self.bus.write_byte_data(self.address_ak, register, value)
File "/usr/local/lib/python3.8/dist-packages/smbus2/smbus2.py", line 458, in write_byte_data
ioctl(self.fd, I2C_SMBUS, msg)
OSError: [Errno 121] Remote I/O error
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 97, in configure
self.configureAK8963(self.mfs, self.mode)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 233, in configureAK8963
self.writeAK(AK8963_CNTL1, 0x00, 0.1)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 1013, in writeAK
self.bus.write_byte_data(self.address_ak, register, value)
File "/usr/local/lib/python3.8/dist-packages/smbus2/smbus2.py", line 458, in write_byte_data
ioctl(self.fd, I2C_SMBUS, msg)
OSError: [Errno 121] Remote I/O error
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "sensorTest.py", line 13, in <module>
mpu.configure() # Apply the settings to the registers.
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 102, in configure
self.configure(retry - 1)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 102, in configure
self.configure(retry - 1)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 105, in configure
raise err
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 97, in configure
self.configureAK8963(self.mfs, self.mode)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 233, in configureAK8963
self.writeAK(AK8963_CNTL1, 0x00, 0.1)
File "/usr/local/lib/python3.8/dist-packages/mpu9250_jmdev/mpu_9250.py", line 1013, in writeAK
self.bus.write_byte_data(self.address_ak, register, value)
File "/usr/local/lib/python3.8/dist-packages/smbus2/smbus2.py", line 458, in write_byte_data
ioctl(self.fd, I2C_SMBUS, msg)
OSError: [Errno 121] Remote I/O error
If I put try/except blocks around smbus2.py (ioctl(self.fd, I2C_SMBUS, msg)), I can get data for the other three sensors:
|.....MPU9250 in 0x68 Address.....|
Accelerometer [-1.210205078125, -8.0, -8.0]
Gyroscope [43.9453125, -1.373291015625, -21.270751953125]
[OSError(121, 'Remote I/O error'),
<smbus2d.SMBus object at 0xffff8d0f20a0>,
12,
3,
7,
None]
Magnetometer [0.0, 0.0, 0.0]
Temperature 24.258753407014705
What the offending function looks like:
def read_i2c_block_data(self, i2c_addr, register, length, force=None):
"""
Read a block of byte data from a given register.
:param i2c_addr: i2c address
:type i2c_addr: int
:param register: Start register
:type register: int
:param length: Desired block length
:type length: int
:param force:
:type force: Boolean
:return: List of bytes
:rtype: list
"""
if length > I2C_SMBUS_BLOCK_MAX:
raise ValueError("Desired block length over %d bytes" % I2C_SMBUS_BLOCK_MAX)
self._set_address(i2c_addr, force=force)
msg = i2c_smbus_ioctl_data.create(
read_write=I2C_SMBUS_READ, command=register, size=I2C_SMBUS_I2C_BLOCK_DATA
)
msg.data.contents.byte = length
try:
ioctl(self.fd, I2C_SMBUS, msg)
except Exception as e:
if hasattr(e, 'message'):
print(e.message)
pprint([e, self, i2c_addr, register, length, force])
return msg.data.contents.block[1:length + 1]
The sensor is readable and is detecting the correct address:
tor@tor:~/robot$ i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Thanks!