proper setting of IOVDD reference voltages

Author: Andrew England

library.properties

@@ -1,5 +1,5 @@
 name=SparkFun VL53L1X 4m Laser Distance Sensor
-version=1.2.1
+version=1.2.2
 author=SparkFun Electronics <techsupport@sparkfun.com>
 maintainer=SparkFun Electronics <sparkfun.com>
 sentence=Library for the SparkFun Qwiic 4m Distance Sensor - VL53L1X

src/vl53l1x_class.cpp

@@ -51,8 +51,8 @@
 
 const uint8_t VL51L1X_DEFAULT_CONFIGURATION[] = {
 0x00, /* 0x2d : set bit 2 and 5 to 1 for fast plus mode (1MHz I2C), else don't touch */
-0x00, /* 0x2e : bit 0 if I2C pulled up at 1.8V, else set bit 0 to 1 (pull up at AVDD) */
-0x00, /* 0x2f : bit 0 if GPIO pulled up at 1.8V, else set bit 0 to 1 (pull up at AVDD) */
+0x01, /* 0x2e : bit 0 if I2C pulled up at 1.8V, else set bit 0 to 1 (pull up at AVDD) */
+0x01, /* 0x2f : bit 0 if GPIO pulled up at 1.8V, else set bit 0 to 1 (pull up at AVDD) */
 0x01, /* 0x30 : set bit 4 to 0 for active high interrupt and 1 for active low (bits 3:0 must be 0x1), use SetInterruptPolarity() */
 0x02, /* 0x31 : bit 1 = interrupt depending on the polarity, use CheckForDataReady() */
 0x00, /* 0x32 : not user-modifiable */