(reconstruct mesh) is missed

[EngMomenEzz]

after upload panorama image, there is no reconstruct mesh option.

---

I can't express my gratitude feeling for your incredible hard work. "Much Thanks"
Maybe I did something wrong!, I don't know.

[tzole1155]

Hi @EngMomenEzz,

Indeed there is no option for reconstructing the mesh as we removed this due to limited resources on the cloud, as pointed out here #5.

I hope this helps.

Giorgos

[EngMomenEzz]

Thank you for your fast respond.
Is there a tool that does this job that you can suggest to me?

another question
Why the point cloud is distorted? the shape is not closed right, there is a gap between edges like the image was 350 degree.
Is that can be fixed?

1103.mp4

[tzole1155]

Hi,

You could use MeshLab for that process.

The quality of the point cloud could be affected by the input panorama image. So if there are issues with this they will be propagated to the later stages of the process.

[EngMomenEzz]

Maybe you are somewhat right about the image quality part (the size of the gap may vary from image to image).

But I assure you that I tried more than 10 images, whether images from the internet or images that I took myself with a 360 camera, and the results was the same (the shape does not close properly).
Check the results screenshot here Issue 1.zip

You can also notice this issue in the Screencast Video demo_gif.gif.