PaddlePaddle · luotao1 · Dec 1, 2022 · Nov 30, 2022 · Nov 30, 2022 · Nov 30, 2022
diff --git a/.travis.yml b/.travis.yml
diff --git a/docs/faq/install_cn.md b/docs/faq/install_cn.md
@@ -29,13 +29,7 @@
 
 + 操作步骤：
 
-1. Python2 情况下，使用如下命令安装 PaddlePaddle。
-
-   ```bash
-   pip install paddlepaddle -i https://mirror.baidu.com/pypi/simple/
-   ```
-
-2. Python3 情况下，使用如下命令安装 PaddlePaddle。
+1. 使用如下命令安装 PaddlePaddle。
 
    ```bash
    pip3 install paddlepaddle -i https://mirror.baidu.com/pypi/simple/

diff --git a/docs/guides/advanced/visualdl_en.md b/docs/guides/advanced/visualdl_en.md
@@ -111,7 +111,6 @@ sudo apt-get install python3-pip python3-dev python-virtualenv
 
 Then create a Virtualenv environment by one of following command:
 ```
-virtualenv ~/vdl  # for Python2.7
 virtualenv -p python3 ~/vdl for Python 3.x
 ```
 

diff --git a/docs/guides/hardware_support/xpu_docs/paddle_install_cn.md b/docs/guides/hardware_support/xpu_docs/paddle_install_cn.md
@@ -157,24 +157,6 @@ cmake .. -DPY_VERSION=3.6 \
 make -j20
 ```
 
-Python2
-
-```
-cmake .. -DPY_VERSION=2.7 \
-         -DCMAKE_BUILD_TYPE=Release \
-         -DWITH_GPU=OFF \
-         -DWITH_XPU=ON \
-         -DON_INFER=ON \
-         -DWITH_PYTHON=ON \
-         -DWITH_AVX=ON \
-         -DWITH_MKL=ON \
-         -DWITH_MKLDNN=ON \
-         -DWITH_XPU_BKCL=ON \
-         -DWITH_DISTRIBUTE=ON \
-         -DWITH_NCCL=OFF
-
-make -j20
-```
 
 **飞腾 CPU+昆仑 XPU+麒麟 V10 系统**
 

diff --git a/docs/install/FAQ.md b/docs/install/FAQ.md
@@ -5,13 +5,6 @@
 
     > 请[安装 nccl2](https://developer.nvidia.com/nccl/nccl-download)
 
-- CentOS6 下如何编译 python2.7 为共享库?
-
-    > 使用以下指令：
-
-        ./configure --prefix=/usr/local/python2.7 --enable-shared
-        make && make install
-
 <!--TODO please add more F&Q parts here-->
 
 - Ubuntu18.04 下 libidn11 找不到？

diff --git a/docs/install/FAQ_en.md b/docs/install/FAQ_en.md
@@ -3,16 +3,6 @@
 
 # **FAQ**
 
-- How to compile python2.7 as a shared library under CentOS6?
-
-    > Use the following instructions:
-
-
-
-        ./configure --prefix=/usr/local/python2.7 --enable-shared
-        make && make install
-
-
 - Ubuntu18.04 under libidn11 can not be found?
 
     > Use the following instructions:

diff --git a/docs/install/compile/arm-compile.md b/docs/install/compile/arm-compile.md
@@ -86,11 +86,6 @@
 
     >具体编译选项含义请参见[编译选项表](https://www.paddlepaddle.org.cn/documentation/docs/zh/develop/install/Tables.html#Compile)
 
-    For Python2:
-    ```
-    cmake .. -DPY_VERSION=2 -DPYTHON_EXECUTABLE=`which python2` -DWITH_ARM=ON -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_XBYAK=OFF
-    ```
-
     For Python3:
     ```
     cmake .. -DPY_VERSION=3 -DPYTHON_EXECUTABLE=`which python3` -DWITH_ARM=ON -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_XBYAK=OFF

diff --git a/docs/install/compile/mips-compile.md b/docs/install/compile/mips-compile.md
@@ -101,11 +101,6 @@
 
     >具体编译选项含义请参见[编译选项表](https://www.paddlepaddle.org.cn/documentation/docs/zh/develop/install/Tables.html#Compile)
 
-    For Python2:
-    ```
-    cmake .. -DPY_VERSION=2 -DPYTHON_EXECUTABLE=`which python2` -DWITH_MIPS=ON -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_XBYAK=OFF -DWITH_MKL=OFF
-    ```
-
     For Python3:
     ```
     cmake .. -DPY_VERSION=3 -DPYTHON_EXECUTABLE=`which python3` -DWITH_MIPS=ON -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_XBYAK=OFF -DWITH_MKL=OFF

diff --git a/docs/install/compile/sw-compile.md b/docs/install/compile/sw-compile.md
@@ -66,10 +66,6 @@
 
     >具体编译选项含义请参见[编译选项表](https://www.paddlepaddle.org.cn/documentation/docs/zh/develop/install/Tables.html#Compile)
 
-    For Python2:
-    ```
-    cmake .. -DPY_VERSION=2 -DPYTHON_EXECUTABLE=`which python2` -DWITH_MKL=OFF -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_PYTHON=ON -DWITH_XBYAK=OFF  -DWITH_SW=ON -DCMAKE_CXX_FLAGS="-Wno-error -w" -DWITH_RCCL=OFF
-    ```
     For Python3:
     ```
     cmake .. -DPY_VERSION=3 -DPYTHON_EXECUTABLE=`which python3` -DWITH_MKL=OFF -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_PYTHON=ON -DWITH_XBYAK=OFF -DWITH_SW=ON -DCMAKE_CXX_FLAGS="-Wno-error -w" -DWITH_RCCL=OFF
@@ -86,7 +82,7 @@
 11. 在当前机器或目标机器安装编译好的`.whl`包：
 
     ```
-    python2 -m pip install -U（whl 包的名字）`或`python3 -m pip install -U（whl 包的名字）
+    python3 -m pip install -U（whl 包的名字）
     ```
 
 恭喜，至此您已完成 PaddlePaddle 在 FT 环境下的编译安装。

diff --git a/docs/install/compile/zhaoxin-compile.md b/docs/install/compile/zhaoxin-compile.md
@@ -90,10 +90,6 @@
 
     >具体编译选项含义请参见[编译选项表](https://www.paddlepaddle.org.cn/documentation/docs/zh/develop/install/Tables.html#Compile)
 
-    For Python2:
-    ```
-    cmake .. -DPY_VERSION=2 -DPYTHON_EXECUTABLE=`which python2` -DWITH_MKL=ON -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_PYTHON=ON
-    ```
     For Python3:
     ```
     cmake .. -DPY_VERSION=3 -DPYTHON_EXECUTABLE=`which python3` -DWITH_MKL=ON -DWITH_TESTING=OFF -DCMAKE_BUILD_TYPE=Release -DON_INFER=ON -DWITH_PYTHON=ON
@@ -110,7 +106,7 @@
 11. 在当前机器或目标机器安装编译好的`.whl`包：
 
     ```
-    python2 -m pip install -U（whl 包的名字）`或`python3 -m pip install -U（whl 包的名字）
+    python3 -m pip install -U（whl 包的名字）
     ```
 
 恭喜，至此您已完成 PaddlePaddle 在 FT 环境下的编译安装。

diff --git a/docs/install/install_Kunlun_en.md b/docs/install/install_Kunlun_en.md
@@ -173,24 +173,6 @@ cmake .. -DPY_VERSION=3.6 \
 make -j20
 ```
 
-For Python2
-
-```
-cmake .. -DPY_VERSION=2.7 \
-         -DCMAKE_BUILD_TYPE=Release \
-         -DWITH_GPU=OFF \
-         -DWITH_XPU=ON \
-         -DON_INFER=ON \
-         -DWITH_PYTHON=ON \
-         -DWITH_AVX=ON \
-         -DWITH_MKL=ON \
-         -DWITH_MKLDNN=ON \
-         -DWITH_XPU_BKCL=ON \
-         -DWITH_DISTRIBUTE=ON \
-         -DWITH_NCCL=OFF
-
-make -j20
-```
 
 **Phytium CPU+Kunlun XPU+Kylin release V10**
-Original file line number
+Diff line change
@@ Expand Up @@
     Then create a Virtualenv environment by one of following command:
     ```
-    virtualenv ~/vdl  # for Python2.7
     virtualenv -p python3 ~/vdl for Python 3.x
     ```
@@ Expand Down @@