delphix · dependabot · Oct 3, 2022 · Oct 13, 2022 · Oct 13, 2022 · Oct 13, 2022
diff --git a/.gitignore b/.gitignore
@@ -80,7 +80,7 @@ modules.order
 #
 # Debian directory (make deb-pkg)
 #
-/debian/
+#/debian/
 
 #
 # Snap directory (make snap-pkg)
@@ -142,7 +142,6 @@ GTAGS
 # id-utils files
 ID
 
-*.orig
 *~
 \#*#
 

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -3,7 +3,7 @@ KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading this returns the valid values that can be written to the
-		on_altvoltage0_mode attribute:
+		filter_mode attribute:
 
 		- auto -> Adjust bandpass filter to track changes in input clock rate.
 		- manual -> disable/unregister the clock rate notifier / input clock tracking.

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>

diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -311,10 +311,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
@@ -763,3 +766,31 @@ Date:		November 2023
 Contact:	"Chao Yu" <chao@kernel.org>
 Description:	It controls to enable/disable IO aware feature for background discard.
 		By default, the value is 1 which indicates IO aware is on.
+
+What:		/sys/fs/f2fs/<disk>/blkzone_alloc_policy
+Date:		July 2024
+Contact:	"Yuanhong Liao" <liaoyuanhong@vivo.com>
+Description:	The zone UFS we are currently using consists of two parts:
+		conventional zones and sequential zones. It can be used to control which part
+		to prioritize for writes, with a default value of 0.
+
+		========================  =========================================
+		value					  description
+		blkzone_alloc_policy = 0  Prioritize writing to sequential zones
+		blkzone_alloc_policy = 1  Only allow writing to sequential zones
+		blkzone_alloc_policy = 2  Prioritize writing to conventional zones
+		========================  =========================================
+
+What:		/sys/fs/f2fs/<disk>/migration_window_granularity
+Date:		September 2024
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Controls migration window granularity of garbage collection on large
+		section. it can control the scanning window granularity for GC migration
+		in a unit of segment, while migration_granularity controls the number
+		of segments which can be migrated at the same turn.
+
+What:		/sys/fs/f2fs/<disk>/max_read_extent_count
+Date:		November 2024
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	It controls max read extent count for per-inode, the value of threshold
+		is 10240 by default.
diff --git a/Documentation/RCU/stallwarn.rst b/Documentation/RCU/stallwarn.rst
@@ -249,7 +249,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be

diff --git a/Documentation/accel/qaic/aic080.rst b/Documentation/accel/qaic/aic080.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+===============================
+ Qualcomm Cloud AI 80 (AIC080)
+===============================
+
+Overview
+========
+
+The Qualcomm Cloud AI 80/AIC080 family of products are a derivative of AIC100.
+The number of NSPs and clock rates are reduced to fit within resource
+constrained solutions. The PCIe Product ID is 0xa080.
+
+As a derivative product, all AIC100 documentation applies.
diff --git a/Documentation/accel/qaic/index.rst b/Documentation/accel/qaic/index.rst
@@ -10,4 +10,5 @@ accelerator cards.
 .. toctree::
 
    qaic
+   aic080
    aic100
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
@@ -874,6 +874,10 @@
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
+	cpufreq_driver= [X86] Allow only the named cpu frequency scaling driver
+			to register. Example: cpufreq_driver=powernow-k8
+			Format: { none | STRING }
+
 	cpuidle.off=1	[CPU_IDLE]
 			disable the cpuidle sub-system
 
@@ -4412,6 +4416,12 @@
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
 				disable the use of MSI interrupts system-wide.
+		clearmsi	[X86] Clears MSI/MSI-X enable bits early in boot
+				time in order to avoid issues like adapters
+				screaming irqs and preventing boot progress.
+				Also, it enforces the PCI Local Bus spec
+				rule that those bits should be 0 in system reset
+				events (useful for kexec/kdump cases).
 		noioapicquirk	[APIC] Disable all boot interrupt quirks.
 				Safety option to keep boot IRQs enabled. This
 				should never be necessary.
@@ -4788,6 +4798,16 @@
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
+	proc_mem.force_override= [KNL]
+			Format: {always | ptrace | never}
+			Traditionally /proc/pid/mem allows memory permissions to be
+			overridden without restrictions. This option may be set to
+			restrict that. Can be one of:
+			- 'always': traditional behavior always allows mem overrides.
+			- 'ptrace': only allow mem overrides for active ptracers.
+			- 'never':  never allow mem overrides.
+			If not specified, default is the CONFIG_PROC_MEM_* choice.
+
 	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.

diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -445,8 +445,10 @@ event	code	Key		Notes
 0x1008	0x07	FN+F8		IBM: toggle screen expand
 				Lenovo: configure UltraNav,
 				or toggle screen expand.
-				On newer platforms (2024+)
-				replaced by 0x131f (see below)
+				On 2024 platforms replaced by
+				0x131f (see below) and on newer
+				platforms (2025 +) keycode is
+				replaced by 0x1401 (see below).
 
 0x1009	0x08	FN+F9		-
 
@@ -506,9 +508,11 @@ event	code	Key		Notes
 
 0x1019	0x18	unknown
 
-0x131f	...	FN+F8	        Platform Mode change.
+0x131f	...	FN+F8		Platform Mode change (2024 systems).
 				Implemented in driver.
 
+0x1401	...	FN+F8		Platform Mode change (2025 + systems).
+				Implemented in driver.
 ...	...	...
 
 0x1020	0x1F	unknown

diff --git a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst
@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:

diff --git a/Documentation/admin-guide/media/saa7134.rst b/Documentation/admin-guide/media/saa7134.rst
@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to

diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst
@@ -55,6 +55,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
 +----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne AC04  | AC04_CPU_10     | AMPERE_ERRATUM_AC03_CPU_38  |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -144,6 +146,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #3456084        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
@@ -184,6 +188,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N3     | #3456111        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V1     | #1619801        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
@@ -249,8 +255,11 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
-|                | Hip09 SMMU PMCG |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip09           | #162100801      | HISILICON_ERRATUM_162100801 |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
@@ -287,3 +296,5 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Microsoft      | Azure Cobalt 100| #2253138        | ARM64_ERRATUM_2253138       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst
@@ -896,10 +896,19 @@ Offset/size:	0x260/4
 
   The kernel runtime start address is determined by the following algorithm::
 
-	if (relocatable_kernel)
-	runtime_start = align_up(load_address, kernel_alignment)
-	else
-	runtime_start = pref_address
+   	if (relocatable_kernel) {
+   		if (load_address < pref_address)
+   			load_address = pref_address;
+   		runtime_start = align_up(load_address, kernel_alignment);
+   	} else {
+   		runtime_start = pref_address;
+   	}
+
+Hence the necessary memory window location and size can be estimated by
+a boot loader as::
+
+   	memory_window_start = runtime_start;
+   	memory_window_size = init_size;
 
 ============	===============
 Field name:	handover_offset
-Original file line number
+Diff line change
@@ Expand Up / @@ -10,4 +10,5 @@ accelerator cards. @@
     .. toctree::
        qaic
+       aic080
        aic100