treewide: standardize installing boot9strap section

docs/installing-boot9strap-(mset9-cli).md

@@ -130,7 +130,7 @@ In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
     + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-mset9#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
-    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter key combo blindly. Press the following buttons on your console in this order:
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
         + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A
 1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console
 <!--@include: ./_include/configure-luma3ds.md -->

docs/installing-boot9strap-(mset9-cli-ios).md

@@ -119,7 +119,7 @@ In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
     + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-mset9#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
-    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter key combo blindly. Press the following buttons on your console in this order:
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
         + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A
 1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console
 <!--@include: ./_include/configure-luma3ds.md -->

docs/installing-boot9strap-(mset9-play-store).md

@@ -107,7 +107,7 @@ In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
     + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-mset9#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
-    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter key combo blindly. Press the following buttons on your console in this order:
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
         + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A
 1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console
 <!--@include: ./_include/configure-luma3ds.md -->

docs/installing-boot9strap-(ntrboot).md

@@ -52,8 +52,10 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
-    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ntrboot)
-1. Once it is completed, force your console to power off by holding down the power button
+    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ntrboot#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
+        + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A
+1. Once it is complete (all seven steps on the bottom screen are green), force your console to power off by holding down the power button
     + Your console will only boot to the SafeB9SInstaller screen until the next section is completed
 
 ### Section IV - Configuring Luma3DS

docs/installing-boot9strap-(safecerthax).md

@@ -95,8 +95,10 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
 In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
-    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-safecerthax)
-1. Once it is complete, press (A) to reboot your console
+    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-safecerthax#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
+        + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A
+1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console
 <!--@include: ./_include/configure-luma3ds.md -->
 
 <!--@include: ./_include/luma3ds-installed-note.md -->

docs/installing-boot9strap-(soundhax).md

@@ -89,8 +89,10 @@ In this section, you will launch Soundhax through the Nintendo 3DS Sound app, wh
 In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
-    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-soundhax)
-1. Once it is complete, press (A) to reboot your console
+    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-soundhax#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
+        + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A
+1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console
 <!--@include: ./_include/configure-luma3ds.md -->
 
 <!--@include: ./_include/luma3ds-installed-note.md -->

docs/installing-boot9strap-(ssloth-browser).md

@@ -84,8 +84,10 @@ In this section, you will visit the browser exploit webpage, which will use univ
 In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
-    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ssloth-browser)
-1. Once it is complete, press (A) to reboot your console
+    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ssloth-browser#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
+        + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A  
+1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console
 <!--@include: ./_include/configure-luma3ds.md -->
 
 ### Section V - Restoring default proxy

docs/installing-boot9strap-(super-skaterhax).md

@@ -105,8 +105,10 @@ A video detailing these steps is available [here](https://www.youtube.com/watch?
 In this section, you will install custom firmware onto your console.
 
 1. When prompted, input the key combo given on the top screen to install boot9strap
-    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-super-skaterhax)
-1. Once it is complete, press (A) to reboot your console
+    + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-super-skaterhax#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info)
+    + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order:
+        + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A 
+1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console
 <!--@include: ./_include/configure-luma3ds.md -->
 
 <!--@include: ./_include/luma3ds-installed-note.md -->