Aviphysics

.github/ISSUE_TEMPLATE/Bug_report.md

@@ -7,20 +7,20 @@ assignees: teckel12
 ---
 
 ### Describe the bug
-<!-- A clear and concise description of the bug and specify the transmitter model (ie: X9D, X7, Horus X10S)  -->
+<!-- A clear and concise description of the bug and specify the transmitter model (ie: X9D, X7, Horus X10S), telemetry protocol (ie: FrSky S.Port, Crossfire), receiver model and any other important hardware details. -->
 
 ### To reproduce
-<!-- Steps to reproduce the behavior, example:  -->
+<!-- Steps to reproduce the behavior, example: -->
 1. Go to '....'
 2. Click on '....'
 3. Scroll down to '....'
 4. See error
 
 ### Expected behavior
-<!-- A clear and concise description of what you expected to happen.  -->
+<!-- A clear and concise description of what you expected to happen. -->
 
 ### Screenshots
-<!-- If applicable, add screenshots to help explain your problem.  -->
+<!-- If applicable, add screenshots to help explain your problem. -->
 
 ### Radio and model settings
 <!-- Below are the instructions for exporting radio and model settings that are needed to simulate (and hopefully reproduce) your problem:
@@ -36,4 +36,4 @@ assignees: teckel12
 -->
 
 ### Additional context
-<!-- Add any other context about the problem here.  -->
+<!-- Add any other context about the problem here. -->

.github/ISSUE_TEMPLATE/Feature_request.md

@@ -7,13 +7,13 @@ assignees: teckel12
 ---
 
 ### Is your feature request related to a problem? Please describe
-<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]  -->
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
 
 ### Describe the solution you'd like
-<!-- A clear and concise description of what you want to happen.  -->
+<!-- A clear and concise description of what you want to happen. -->
 
 ### Describe alternatives you've considered
-<!-- A clear and concise description of any alternative solutions or features you've considered.  -->
+<!-- A clear and concise description of any alternative solutions or features you've considered. -->
 
 ### Additional context
-<!-- Add any other context or screenshots about the feature request here.  -->
+<!-- Add any other context or screenshots about the feature request here. -->

.github/ISSUE_TEMPLATE/Question.md

@@ -7,20 +7,20 @@ assignees: teckel12
 ---
 
 ### Describe your question
-<!-- A clear and concise description of your question and specify the transmitter model (ie: X9D, X7, Horus X10S)  -->
+<!-- A clear and concise description of your question and specify the transmitter model (ie: X9D, X7, Horus X10S), telemetry protocol (ie: FrSky S.Port, Crossfire), receiver model and any other important hardware details. -->
 
 ### To reproduce
-<!-- Steps to reproduce the behavior, example:  -->
+<!-- Steps to reproduce the behavior, example: -->
 1. Go to '....'
 2. Click on '....'
 3. Scroll down to '....'
 4. Should it be doing this?
 
 ### Expected behavior
-<!-- A clear and concise description of what you expected to happen.  -->
+<!-- A clear and concise description of what you expected to happen. -->
 
 ### Screenshots
-<!-- If applicable, add screenshots to help explain your question.  -->
+<!-- If applicable, add screenshots to help explain your question. -->
 
 ### Additional context
-<!-- Add any other context about the question here.  -->
+<!-- Add any other context about the question here. -->

README.md

@@ -1,47 +1,49 @@
-## INAV Lua Telemetry Flight Status for Taranis/Horus/Jumper T16 - v1.7.2
+## INAV Lua Telemetry Flight Status for Taranis/Horus/Jumper/Nirvana - v1.7.3
 
-### FrSky SmartPort(S.Port), D-series, F.Port & TBS Crossfire telemetry on Taranis, Horus & Jumper T16 transmitters
+### FrSky SmartPort(S.Port), D-series, F.Port & TBS Crossfire telemetry on Taranis, Horus, Jumper & Nirvana transmitters
 
 [![Build Status](https://travis-ci.com/iNavFlight/LuaTelemetry.svg?branch=master)](https://travis-ci.com/iNavFlight/LuaTelemetry)
 
 ## Interface
 
-#### [Video of Lua Telemetry](https://youtu.be/YaUgywuT1YM)
+#### [Video of Lua Telemetry running on X9D+](https://youtu.be/YaUgywuT1YM)
 
-#### Horus/Jumper T16 view
+#### Horus/Jumper T16 and Nirvana view
 
-![sample](assets/iNavHorus.png "View on Horus transmitters")
+![sample](assets/iNavHorus.png "View on Horus transmitters")  
+![sample](assets/iNavNirvana.jpg "View on Nirvana NV14 transmitter")
 
 #### Pilot (glass cockpit) view for fixed wing pilots
 
-![sample](assets/iNavQX7pilot.png "Pilot view on Q X7 and X-Lite")  
+![sample](assets/iNavQX7pilot.png "Pilot view on Q X7, X-Lite & Jumper T12")  
 ![sample](assets/iNavX9Dpilot.png "Pilot view on Taranis X9D, X9D+ and X9E")
 
 #### Radar (map) view
 
-![sample](assets/iNavQX7radar.png "Radar view on Q X7 and X-Lite")  
+![sample](assets/iNavQX7radar.png "Radar view on Q X7, X-Lite & Jumper T12")  
 ![sample](assets/iNavX9Dradar.png "Radar view on Taranis X9D, X9D+ and X9E")
 
 #### Altitude graph view
 
-![sample](assets/iNavQX7alt.png "Altitude graph view on Q X7 and X-Lite")  
+![sample](assets/iNavQX7alt.png "Altitude graph view on Q X7, X-Lite & Jumper T12")  
 ![sample](assets/iNavX9Dalt.png "Altitude graph view on Taranis X9D, X9D+ and X9E")
 
 #### Classic view
 
-![sample](assets/iNavQX7.png "Classic view on Q X7 and X-Lite")  
+![sample](assets/iNavQX7.png "Classic view on Q X7, X-Lite & Jumper T12")  
 ![sample](assets/iNavX9D.png "Classic view on Taranis X9D, X9D+ and X9E")
 
 ## Features
 
-* Works with all FrSky telemetry receivers (X, R9 and D series), all TBS Crossfire receivers, all FrSky Taranis and Horus transmitters, and the Jumper T16 transmitter
-* Compatible with Betaflight using FrSky X or R9 series receivers (with reduced functionality) and TBS Crossfire support with Betaflight 4.0.0+
+* Supported receivers: All FrSky telemetry receivers (X, R9 and D series) and all TBS Crossfire receivers
+* Supported transmitters: All FrSky Taranis and Horus transmitters, Jumper T12 & T16 and the FLYSKY Nirvana NV14
+* Compatible with Betaflight using FrSky X or R9 series receivers (with reduced functionality) and TBS Crossfire support with Betaflight v4.0.0+
 * Launch/pilot-based model orientation and location indicators (great for lost orientation/losing sight of your model)
 * Compass-based direction indicator (with magnetometer sensor on multirotor or fixed-wing with GPS)
 * Pilot (glass cockpit) view which includes attitude indicator as well as pilot-familiar layout of additional data
 * Radar (map) view shows model in relationship to home position, can be displayed either as launch/pilot-based or compass-based orientation
 * Altitude graph view shows altitude for the last 1-6 minutes
-* Horus and Jumper T16 transmitters show all views at the same time, and include additional features like roll scale
+* Horus, Jumper T16 & FLYSKY Nirvana NV14 transmitters show all views at the same time, and include additional features like roll scale
 * Bar gauges for Fuel (% battery mAh capacity remaining), Battery voltage, RSSI strength, Transmitter battery, GPS accuracy (HDOP), Variometer (and Altitude for X9D, X9D+ and X9E transmitters)
 * Display and voice alerts for flight modes and flight mode modifiers (altitude hold, heading hold, home reset, etc.)
 * Voice notifications for % battery remaining (based on current), voltage low/critical, high altitude, lost GPS, ready to arm, armed, disarmed, etc.
@@ -56,12 +58,11 @@
 
 ## Requirements
 
-* [OpenTX v2.2.2+](http://www.open-tx.org/) running on Taranis Q X7/Q X7S, X9D/X9D+, X9E, X9 Lite, X-Lite/X-Lite Pro, Horus X10/X10S or X12S (OpenTX v2.2.3+ is suggested)
-* Jumper T16 requires [JumperTX 2.2.3+](https://www.jumper.xyz/jumpertx-t16) (May 23, 2019 or after release)
-* The OpenTX/JumperTX firmware on your transmitter needs to [includes the `luac` build option](https://youtu.be/nYeB0IXT-10?t=283)
-* FrSky X, R9 or D series telemetry receiver: X4RSB, X8R, XSR, R-XSR, XSR-M, XSR-E, RX4R, RX6R, XM, XM+, R9, R9 Slim, R9 Slim+, R9 Mini, R9 MM, D8R-II plus, D8R-XP, D4R-II, etc. or any TBS Crossfire receiver: Micro, Nano, Diversity, etc.
-* [INAV v1.7.3+](https://github.com/iNavFlight/inav/releases) running on your flight controller (INAV v2.1.0+ is suggested for full functionality) - Also compatible with Betaflight (with reduced functionality)
-* GPS - If you're looking for a GPS module, I suggest the [Beitian BN-880](https://www.banggood.com/UBLOX-NEO-M8N-BN-880-Flight-Control-GPS-Module-Dual-Module-Compass-p-971082.html)
+* [INAV v2.1.0+](https://github.com/iNavFlight/inav/releases) running on your flight controller - Also compatible with Betaflight v4.0.0+ (with reduced functionality)
+* [OpenTX v2.2.3+](http://www.open-tx.org/) running on Taranis Q X7/Q X7S, X9D/X9D+, X9E, X9 Lite, X-Lite/X-Lite Pro, Horus X10/X10S or X12S
+* Jumper T12/T16 requires [JumperTX 2.2.3+](https://www.jumper.xyz/) (May 23, 2019 or after release)
+* FrSky X, R9 or D series telemetry receiver: X4RSB, X8R, XSR, R-XSR, XSR-M, XSR-E, RX4R, RX6R, R9, R9 Slim, R9 Slim+, R9 Mini, R9 MM, D8R-II plus, D8R-XP, D4R-II, etc. or any TBS Crossfire receiver: Micro, Nano, Diversity, etc.
+* GPS - If you're looking for a GPS module, I suggest the [Beitian BN-880](https://us.banggood.com/custlink/vvGD6DZWyg)
 
 ## Suggested Sensors
 
@@ -71,20 +72,16 @@
 
 ## Notes
 
-* INAV v2.1.0+ is required for TBS Crossfire support (some telemetry missing from Crossfire: HDOP, GPS altitude, variometer and heading hold notifications)
-* INAV v2.0.0+ is required for FrSky D-series telemetry and proper GPS accuracy (HDOP) display
-* If using pilot or radar view or a Horus transmitter and INAV v2.0+, set `frsky_pitch_roll = ON` in CLI settings for more accurate attitude display
-* INAV v1.9.1+ is required for F.Port compatibility
-* INAV v1.8.0+ is required for `Home reset` voice notification
-* OpenTX v2.2.2 (release version) is required for compatibility with Taranis X-Lite transmitter and Crossfire telemetry
-* Betaflight compatibility is mostly complete, except for some GPS and flight mode information missing from Betaflight
-* Use the OSD to control VTx band, frequency and power (Betaflight lua script can't be run at the same time as INAV Lua Telemetry due to limited transmitter memory)
+* Some telemetry is missing from Crossfire: HDOP, GPS altitude and some secondary flight mode notifications like heading hold
+* Betaflight v4.0.0+ mostly works, except for some GPS and flight mode information which is missing from Betaflight
+* Use the OSD to control VTx band, frequency and power (except for on 2019 series Taranis transmitters, Betaflight's lua script can't run at the same time as INAV Lua Telemetry due to limited transmitter memory)
 
 ## Special Thanks
 
 * [Team Black Sheep](https://www.team-blacksheep.com/) - Sponsoring TBS Crossfire telemetry support
-* [FrSky](https://www.frsky-rc.com/) - Sponsoring Horus transmitter support
+* [FrSky](https://www.frsky-rc.com/) - Sponsoring [FrSky Horus](https://us.banggood.com/custlink/vG3D6Kiprr) transmitter support
 * [Jumper](https://www.jumper.xyz/) - Sponsoring Jumper T16 transmitter support
+* [FLYSKY](https://www.flysky-cn.com/) - Sponsoring [FLYSKY Nirvana NV14](https://us.banggood.com/custlink/GmGm0GZcpt) transmitter support
 
 ## Setup
 

dist/WIDGETS/iNav/main.lua

@@ -1,7 +1,7 @@
 local buildMode = ...
 local iNav = nil
 local options = {
-	{ "Restore", BOOL, 0},
+	{ "Restore", BOOL, 1},
 	{ "Text", COLOR, BLACK},
 	{ "Warning", COLOR, YELLOW}
 }
@@ -13,6 +13,15 @@ if string.sub(r, -4) == "simu" and buildMode ~= true then
 	loadScript(TELE_PATH .. "iNav", "tc")(true)
 end
 
+-- Nirvana NV14 doesn't have have these global constants, so we set them
+if r == "NV14" then
+	EVT_SYS_FIRST = 1 --1542
+	EVT_ROT_LEFT = 2 --57088
+	EVT_ROT_RIGHT = 3 --56832
+	EVT_ENTER_BREAK = 4 --514
+	EVT_EXIT_BREAK = 5 --516
+end
+
 -- Run once at the creation of the widget
 local function create(zone, options)
 	iNavZone = { zone = zone, options = options }

src/iNav.lua

@@ -3,10 +3,10 @@
 -- Docs: https://github.com/iNavFlight/LuaTelemetry
 
 local buildMode = ...
-local VERSION = "1.7.2"
+local VERSION = "1.7.3"
 local FILE_PATH = "/SCRIPTS/TELEMETRY/iNav/"
 local SMLCD = LCD_W < 212
-local HORUS = LCD_W >= 480
+local HORUS = LCD_W >= 480 or LCD_H >= 480
 local FLASH = HORUS and WARNING_COLOR or 3
 local tmp, view, lang, playLog
 local env = "bx"
@@ -17,17 +17,17 @@ local v, r, m, i, e = getVersion()
 if string.sub(r, -4) == "simu" then
 	env = "tx"
 	if buildMode ~= false then
-		loadScript(FILE_PATH .. "build", "tx")(buildMode)
+		loadScript(FILE_PATH .. "build", env)(buildMode)
 	end
 end
 
 local config = loadScript(FILE_PATH .. "config" .. ext, env)(SMLCD)
 collectgarbage()
 
-local modes, units, labels = loadScript(FILE_PATH .. "modes" .. ext, env)()
+local modes, units, labels, dir = loadScript(FILE_PATH .. "modes" .. ext, env)(HORUS)
 collectgarbage()
 
-local data, getTelemetryId, getTelemetryUnit, PREV, NEXT, MENU = loadScript(FILE_PATH .. "data" .. ext, env)(r, m, i, HORUS)
+local data, getTelemetryId, getTelemetryUnit, PREV, NEXT, MENU, text, line, rect, fill, frmt = loadScript(FILE_PATH .. "data" .. ext, env)(r, m, i, HORUS)
 collectgarbage()
 
 loadScript(FILE_PATH .. "load" .. ext, env)(config, data, FILE_PATH)
@@ -49,7 +49,7 @@ collectgarbage()
 local crsf, distCalc = loadScript(FILE_PATH .. "other" .. ext, env)(config, data, units, getTelemetryId, getTelemetryUnit, FILE_PATH, env, SMLCD, FLASH)
 collectgarbage()
 
-local title, gpsDegMin, hdopGraph, icons = loadScript(FILE_PATH .. "func_" .. (HORUS and "h" or "t") .. ext, env)(config, data, FILE_PATH)
+local title, gpsDegMin, hdopGraph, icons, rect = loadScript(FILE_PATH .. "func_" .. (HORUS and "h" or "t") .. ext, env)(config, data, modes, dir, SMLCD, FILE_PATH, text, line, rect, fill, frmt)
 collectgarbage()
 
 local function playAudio(f, a)
@@ -459,20 +459,20 @@ local function run(event)
 	-- Clear screen
 	if HORUS then
 		-- Display error if Horus widget isn't full screen
-		if icons.nfs ~= nil then
-			icons.nfs()
+		if data.nfs ~= nil then
+			data.nfs()
 			return 0
 		end
 		-- On Horus use sticks to control the menu
-		event = icons.clear(event, data)
+		event = data.clear(event)
 	else
 		lcd.clear()
 	end
 
 	-- Display system error
 	--[[
 	if data.msg then
-		lcd.drawText((LCD_W - string.len(data.msg) * (HORUS and 13 or 5.2)) * 0.5, HORUS and 130 or 27, data.msg, HORUS and MIDSIZE or 0)
+		text((LCD_W - string.len(data.msg) * (HORUS and 13 or 5.2)) * 0.5, HORUS and 130 or 27, data.msg, HORUS and MIDSIZE or 0)
 		return 0
 	end
 	]]
@@ -486,15 +486,15 @@ local function run(event)
 			data.v = 9
 		end
 		tmp = config[30].v
-		view(data, config, units, lang, event, gpsDegMin, getTelemetryId, getTelemetryUnit, FILE_PATH, SMLCD, FLASH, PREV, NEXT, HORUS, env)
+		view(data, config, units, lang, event, gpsDegMin, getTelemetryId, getTelemetryUnit, SMLCD, FLASH, PREV, NEXT, HORUS, text, rect, fill, frmt, env)
 		if HORUS then
-			icons.menu(config, data, icons, tmp)
+			data.menu(tmp)
 		end
 		-- Exit menu or select log for playback, save config settings
 		if data.configSelect == 0 and (event == EVT_EXIT_BREAK or (event == EVT_ENTER_BREAK and data.configStatus == 34 and config[34].x > -1 and not data.armed)) then
 			view = nil
 			collectgarbage()
-			loadScript(FILE_PATH .. "save" .. ext, env)(config, data, FILE_PATH)
+			loadScript(FILE_PATH .. "save" .. ext, env)(config, data, frmt, FILE_PATH)
 		end
 	else
 		-- User input
@@ -520,15 +520,15 @@ local function run(event)
 		if data.v ~= config[25].v then
 			view = nil
 			collectgarbage()
-			view = loadScript(FILE_PATH .. (HORUS and "horus" or (config[25].v == 0 and "view" or (config[25].v == 1 and "pilot" or (config[25].v == 2 and "radar" or "alt")))) .. ext, env)()
+			view = loadScript(FILE_PATH .. (HORUS and (data.nv and "nirvana" or "horus") or (config[25].v == 0 and "view" or (config[25].v == 1 and "pilot" or (config[25].v == 2 and "radar" or "alt")))) .. ext, env)()
 			data.v = config[25].v
 		end
-		view(data, config, modes, units, labels, gpsDegMin, hdopGraph, icons, calcBearing, calcDir, VERSION, SMLCD, FLASH, FILE_PATH)
+		view(data, config, modes, dir, units, labels, gpsDegMin, hdopGraph, icons, calcBearing, calcDir, VERSION, SMLCD, FLASH, FILE_PATH, text, line, rect, fill, frmt)
 	end
 	collectgarbage()
 
 	-- Paint title
-	title(data, config, SMLCD)
+	title()
 
 	return 0
 end