Finds every I2C device on the bus.

The Repo contains KiCAD hardware files and software for Morph Watch

Simple HAL driver for ILI9341 320x240 TFT LCD for STM32 microcontrollers

STM32 based oscilloscope, AiR 6 sem PWR

STM32 based project on Person and Tone Identification

The purpose of this project is to bypass the physical requirements of the BootLoader access. The approach is the trigger the MCU to enter BootLoader Mode via UART by only using Tx, Rx and Gnd pins. Moreover, the trigger UART port can also be used to program the MCU.

Example for NUCLEO-L476RG how to use bno08x-rvc lib to receive data from the BNO08x sensor (BNO080/85/86) in RVC mode.

This repository is made up of different branches that reflect the use of different peripherals on a STM32L476RG microcontroller

Deskovery bot firmware

This repository contains projects and examples developed for the ObCP (Personal Connected Object), a platform built around the STM32L476 microcontroller and Bluetooth modules SPBTLE-RF (pre-2024) and BlueNRG-M0 (from 2024). It is designed to enable prototyping and learning in IoT applications, focusing on low-energy and efficient communication.

MPU6050 (GY-521) Driver for STM32 with Motion and Zero-Motion Detection

4 - led handler and potentiometer chart drawer controlled on mobile app via bluetooth.

Example for SSD1306 OLED display written for STM32L476RG MCU, which shows whatever you want on OLED display.

All labs from CPE 3000 compiled into one single repository -Anindita

A program for the STM32L476RG microcontroller sending device rotation data to the computer. The device acts as a controller for a game "Ścigałka".

Some Arm Assembly Code for Stm32-M4 board/cpu and a project with RedBlocks used for simulation . Programs used Keil uVision(IDE), RedBlocks Simulator. In latest projects I used STM32CUBEMX too

Signal generator core for Nucleo-L476RG board

Servotester based on STM32L478G-Discovery board

BLE Python program to scan and connect the SensorTile device and enable BLE notification.